Faster Connection: Plug & Play Connectors


In today’s world, safety is most important criteria for selection of electrical solutions for your offices. As Connect System, we stand for safety, reliability & long-lasting solutions at the right price for our customers. So, let’s know about the Faster Connection: Plug & Play Connectors.

The Plug & Play Solution for Your Application

Wiring of electrical sockets or lights should always be with plug & play connectors, this way we can make it more secure and at the same time makes. So, it faster execution and last long-lasting solution

Industrially prefabricated and durable connectors boast and impressive 70% time saving and 30% cost saving , our connectors enables simple , cost effective and future proof electrical installations

Therefore, to make plug & play , our GST Connectors play a very important role , with male and Female Connectors , connections are locked to each other and even if you touch live connector. So, you will not get shock , as connections are inside the connector and top surface has no current.

Male Connecter

Female Connector

To make faster execution of work and to make flexible spaces, our Distributor plays an important role

From Above diagram, you can see following things:

  • First wire is coming from the floor to the workstation
  • Second this wire from floor is connected to one female connector, this female connector is giving power to the distributor
  • Third from distributor, four connections are coming out to give power to four workstations

By this way, you just have to give power to one female connector and all the workstations will be live in few minutes

For example, if you have 200 workstations and you have cluster of 4 workstations , so you have 50 x 4 = 200 workstations , each workstations will have 2 power sockets and 1 switch

Total socket = 200 x 2 = 400

No. of Total switch = 200 x 1 = 200

Total Connections = 600

With our Distributor, you need to connect only one female connector and just required to give connection to 50 female connector only, whereas conventional wiring , you need to give connection to 600 connections

Comparison of Normal Wiring and Wiring using Connectors

Normal Wiring

  1. Each & every socket must be wired
  2. Connections are with taping system
  3. Lose connections are possible
  4. As per above example , Total 600 connections to be made
  5. Reconfiguration of workstations is not possible, due to hard wire
  6. Incidences like fire can occur due to lose connection

Wiring using Connectors

  1. Only one female connector to be wired
  2. Connections are secure with Interlocable connectors
  3. No lose connection
  4. Only 50 connections to be made. So, we have to connect only one female connector per workstations
  5. Just remove one female connector and entire cluster can be reconfigure
  6. Lockable connectors make it most secured system and no change of fire due to connectors

Different Type of Distributors

1 Input – 5 Output

It has 1 input and distribute to 5 units , good for cluster of 5 workstations

1 Input – 3 Output

It has 1 input and distribute to 3 units , good for cluster of 3 workstations

1 Input – 2 Output

It has 1 input and distribute to 2 units , good for cluster of 2 workstations

Leave a Reply

Your email address will not be published. Required fields are marked *

Open chat
Start Chat
Hello 👋
Can we help you?